Downloadable Content: Case Studies, White Papers, Datasheets

AMR is caused by the misuse of antimicrobials, but made worse by antimicrobials contaminating our water. White paper discusses tackling AMR through water treatment.

Removal of pharmaceutical residues (Ciprofloxacin, Diclofenac and Ibuprofen) from wastewater.

Reduction from 15 mg/L to 0.01 mg/L was reached in less than 6 minutes residence time using about 0.70 Euros worth of energy per m³

Nyex removed 99% of nicotine from the waste stream to allow our client to discharge their effluent.

Nyex reduced the overall COD loading from 50mg/L to limit of detection which enabled wastewater reuse.

Nicotine removal from e-cig and tobacco wastewater using a Nyex-a water treatment system.

Phenol removal from chemical wastewater using a Nyex-a water treatment system.

Targeted reduction of Cetylpyridinium Chloride (CPC) using a Nyex-a water treatment system.

Complete removal of colour and reduction of COD in tea wash water using a Nyex-a water treatment system

How we achieved COD and dye removal from textiles wastewater using a combination of our Nyex-a and Nyex-e water treatment processes.

How Nyex was used to help an agrochemical producer reduce its wastewater discharge contamination to drinking water standards.

Removal of recalcitrant organics from reverse osmosis reject water as part of a petrochemical wastewater treatment process.

How Nyex™ effectively and safely removes BTEX and phenol from specialty chemical wastewater – to below measurable levels.

What are PNEC levels, why are they so important? Our PNEC guide tells you all you need to know to achieve your PNEC levels.

Nyex removed 99% of nicotine from the waste stream to allow our client to discharge their effluent.

A world leading IDM came to us because they had azoles in the water which their existing water treatment processes were unable to remove.

This case study describes the removal by Nyex of persistent organic contaminants, BTEX and PAHs.

With a flow rate of 60 m3/h and an influent concentration of 90 – 150 mg/L COD, the target was to reduce the COD by 15mg/L for safe discharge.

Arvia offer flexible packages to purchase or rent different models or combination of our technologies based on recommendations from our Process Engineers.

Our expert Process Engineers work to determine the best solution for each tertiary treatment challenge, dependant on individual targets and budget.